Comdial FX Series Dokumentacja Pobierz pdf (Strona 19)

FX II Hardware Introduction

Printed in the USA Page 5 GCA39-824 Rev 2, Issue 4/02

* 8 Dipswitches: First Bank: 1-4; Second Bank: 5-8. Only two dipswitches are functional.

They are:

Dipswitch 1: Sets the connection speed on the FXCPU board communication ports.

When dipswitch 1 is in the down position (on) the communication ports on the FXCPU

board are set as follows:

Port 1: 2400

Port 2: 9600

Dipswitch 8: Used for Master clearing the system after a software upgrade. This switch

is used during the software initialization and upgrade process of the system. When the

dipswitch is down (on), the system will Master Clear (wipe out) any previously stored

database and load a default set of parameters.

* System Reset button

* Internal Modem: Auto-detect modem (Auto-detects signals up to 19,200 BPS)

• Takes incoming CO calls only, no intercom calls. An intercom call gets a busy tone.

• Is assigned a default pilot number of 5999

• Is used for remote programming of the system

• Is programmable for Day or Night Ring

FXSRV2-II Services Board

Description

This FX II Services board is required if you plan to expand beyond 1 cabinet. It has the same

common components as the FXSRV-EX, but has enhanced capabilities that expansion requires.

FXAUX2-08 / FXAUX2-16 Auxiliary Board

Description

• This auxiliary board is only used if the customer has no desire to expand the FX II system.

You cannot expand to additional cabinets with an FXAUX2-08 or 16. However, beyond its

non-expandability, there are some definite benefits to the FXAUX2-08 or 16.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 251 252

Brak uwag

Comdial FX Series Dokumentacja Strona 19